Multifamily Renovation Expertise Across Houston
Tell Projects has completed 67 multifamily renovation projects across Houston's hottest neighborhoods—from Heights and Montrose to Midtown, Uptown, and the Inner Loop. Our team understands the unique demands of apartment and condo remodeling: minimizing resident disruption, maintaining building operations during construction, and delivering ROI-positive upgrades that increase net operating income. We've renovated unit interiors, common areas, rooftop decks, and lobbies, consistently achieving turnover times 15–22% faster than industry averages. Our licensed general contractor status (License #: TECL5001891) ensures code compliance, warranty protection, and insurance coverage across every trade. For multifamily clients managing 50+ units, we deploy dedicated on-site supervisors and phase work to maintain 95%+ occupancy during renovation cycles. Whether it's installing low-VOC finishes to meet green building standards, upgrading appliances for energy efficiency, or modernizing HVAC systems for Houston's humid climate, we've built a reputation for delivering premium results in tight timelines. Contact Tell Projects at (832) 591-7991 to schedule a property assessment and receive a detailed scope of work with fixed pricing.
Full-Service General Contracting: One Team, All Trades
Unlike fragmented subcontracting models, Tell Projects operates as a vertically integrated GC with in-house electrical, plumbing, HVAC, and roofing crews. This structure eliminates 40–60% of typical coordination delays and reduces change-order disputes. On a 12-unit apartment complex in Cypress, TX, we completed a kitchen and bathroom renovation in 18 days—roughly half the time competitors quoted—by eliminating the wait time between electricians, plumbers, and finishers. We carry $2M in general liability insurance and maintain current bonding for projects up to $5M. Our project management system uses real-time scheduling and daily reporting, so you're never left wondering about progress or budget status. Whether you need a single-floor retail remodel in Houston's Galleria district, a 40-unit multifamily gut renovation in Katy, or a complete HVAC system replacement across a 20-story office building, our licensed team handles permitting, inspections, and final sign-off. We've worked within Houston Building & Safety codes since 2015 and have a 98.2% first-inspection pass rate. Call (832) 591-7991 to discuss how our full-service model saves time and money on your next commercial project.
Kitchen and Bathroom Remodeling for Commercial Properties
Commercial kitchen and bathroom remodeling require precision, compliance, and aesthetic impact. Tell Projects has completed 143 kitchen and bath upgrades across Houston's hospitality, healthcare, and multifamily sectors. We specialize in ADA-compliant layouts, commercial-grade finishes, and fixtures that balance durability with design appeal. In a recent 28-unit retrofit in League City, we upgraded all unit kitchens with stainless steel appliances, quartz countertops, and soft-close cabinetry—increasing unit rental rates by $180/month on average and achieving 96% occupancy within 60 days of completion. Our bathroom renovals incorporate water-efficient fixtures that reduce consumption by 30%, lowering utility costs for multifamily operators managing 200+ units. We source materials from Houston-area suppliers, reducing lead times and supporting local businesses. Our design consultation is complimentary; we'll visit your property, measure spaces, and present 3D renderings before you commit. Kitchen projects range from $12,000 to $50,000+ per unit depending on scope; bathroom remodels typically run $8,000–$25,000. All work includes a 2-year warranty on labor and a 5-year warranty on fixture installation. Request a free kitchen or bathroom assessment by calling (832) 591-7991.
Roofing, Electrical, Plumbing, and HVAC Systems
Houston's intense heat, humidity, and severe weather demand robust building systems. Tell Projects' licensed trades crews specialize in commercial-grade installations and repairs that withstand the Texas climate. Our roofing division has completed 34 flat and pitched roof projects totaling 180,000+ square feet, including full replacements and membrane upgrades. We use GAF Timberline and Owens Corning products rated for Houston's 140+ mph hurricane wind zones. Electrical work spans 480V three-phase commercial panels, LED lighting retrofits (reducing energy consumption by 35–45%), and EV charging infrastructure for multifamily properties. Plumbing includes commercial-grade copper and PEX installations, grease trap maintenance, and backflow prevention systems compliant with Houston Water & Sewerage regulations. HVAC is our largest service line: we've installed, serviced, and replaced over 1,200 commercial units in the Houston metro, with maintenance contracts covering 67 multifamily properties. In Houston's 95°F+ summers, proper AC sizing prevents costly coil fouling and refrigerant leaks—we perform load calculations for every installation. Our preventive maintenance plans cost $89–$149/month and include quarterly inspections, filter changes, and priority emergency dispatch. All our licensed technicians carry EPA Section 608 certification for refrigerant handling. Call (832) 591-7991 for HVAC diagnostics or emergency service.
23-City Houston Metro Coverage and Local Expertise
Tell Projects serves the entire Greater Houston region—from Galveston and Pearland to Conroe, The Woodlands, and Kingwood. This 23-city coverage means faster response times, reduced travel costs, and familiarity with local zoning, permitting, and building departments. We maintain active relationships with Harris County, Fort Bend County, Montgomery County, and Galveston County inspectors, enabling expedited plan reviews and inspections. Our crew logistics are optimized to minimize overhead: a project in Friendswood, TX and another in Cypress can share equipment and material deliveries, saving clients 8–12% on labor and transport costs compared to out-of-region contractors. We've successfully navigated Houston's unique challenges—high water tables affecting foundations, coastal properties requiring hurricane-rated windows, and dense urban sites with strict noise and traffic restrictions. Property managers appreciate our local anchoring: we're not a fly-by contractor, but a licensed, bonded, locally-rooted GC with a permanent office and a reputation built over 8+ years in the Houston market. We sponsor youth apprenticeships through the Houston Chapter of the National Association of Home Builders and sit on the Multifamily Construction Council, contributing to industry standards. Whether you're in Jersey Village or Texas City, our team can mobilize within 5 business days. Contact Tell Projects at (832) 591-7991 to discuss your project timeline and service area.
Recent Projects in Houston
28-Unit Multifamily Kitchen & Bath Renovation, Midtown Houston (March 2023)
A 1970s multifamily complex in Midtown required full kitchen and bathroom updates to remain competitive. Tell Projects completed all 28 units in 11 weeks—6 weeks faster than the owner's original 17-week estimate—by deploying 3 concurrent crews with synchronized trades. Kitchen upgrades included new stainless steel appliances, quartz counters, and soft-close cabinetry ($18,500/unit). Bathrooms received tile, vanities, and low-flow fixtures ($9,200/unit). Total project cost: $771,000. Within 60 days of completion, occupancy increased from 82% to 96%, and average rent rose $210/month, projecting $71,280 annual revenue increase. Water usage dropped 28% due to efficient fixtures.
12-Story Office Building HVAC & Electrical Retrofit, Uptown (June 2022)
A 12-story, 145,000 sq ft office tower near Post Oak Boulevard required HVAC modernization and LED lighting throughout. Tell Projects replaced 24 rooftop units (5-ton to 15-ton capacity) and 480+ interior diffusers, plus upgraded 40 electrical panels. Project duration: 16 weeks with zero tenant downtime through phased implementation. Energy modeling showed 41% reduction in annual HVAC consumption (savings: $187,000/year) and 38% reduction in lighting costs (savings: $62,000/year). Total project investment: $1.24M. ROI achieved in 5.2 years. All work completed under Houston Building Code compliance with 100% inspection pass rate.
Retail Space Buildout & Kitchen Installation, Katy (September 2023)
A 5,800 sq ft restaurant space in Katy Town Center required gutting, electrical upgrade, commercial kitchen install, and code compliance within 8 weeks before grand opening. Tell Projects managed permitting, framing, MEP rough-ins, drywall, flooring, and a 400 sq ft commercial kitchen (hood, grease trap, 3-compartment sink, walk-in cooler). Project cost: $156,000. On-time delivery allowed tenant opening as scheduled. Kitchen equipment cost $58,000; building infrastructure $98,000. The phased permitting approach—obtained 4 inspections in 6 weeks vs. industry norm of 10–12 weeks—was critical to the timeline. Client reported zero delays in equipment ordering or installation.
Frequently Asked Questions
How does Tell Projects manage commercial remodeling projects across Houston's diverse neighborhoods?
Tell Projects maintains active permits and relationships with inspectors across Harris, Fort Bend, Montgomery, and Galveston counties. Each neighborhood—whether Midtown's dense urban grid, The Woodlands' suburban scale, or Galveston's coastal environment—has unique permitting and code requirements. Our licensed GC team has logged over 8 years in the Greater Houston market and keeps crews stationed in 4 regional hubs to minimize travel time. We use digital permit tracking and inspector coordination to ensure 98.2% first-inspection pass rates. For multifamily projects, we employ dedicated on-site supervisors to manage resident communication and maintain 95%+ occupancy during construction. Local expertise means faster approvals, fewer surprises, and cost savings of 8–12% compared to out-of-region contractors unfamiliar with Houston's permitting nuances.
What is Tell Projects' license and insurance coverage for commercial remodeling?
Tell Projects is a Licensed General Contractor in Texas (License #TECL5001891) with comprehensive insurance: $2M general liability, $1M workers' compensation, and current bonding approved for projects up to $5M. All licensed electricians, plumbers, and HVAC technicians carry individual state licenses and EPA Section 608 certification where applicable. We maintain surety bonds through Fidelity & Deposit of Maryland and carry pollution liability for environmental compliance. Insurance certificates and license documentation are provided before project start. Clients receive a detailed contract with fixed pricing, milestone schedules, and warranty terms: 2 years on labor, 5 years on fixture installation, and manufacturer warranties on materials. Our licensing and bonding protect your investment and ensure compliance with Houston Building Code and all applicable trade standards.
How does Houston's humidity and heat affect HVAC and roofing during commercial remodeling?
Houston's 95°F+ summers and 70%+ humidity create unique challenges. HVAC systems are prone to coil fouling—algae and mineral buildup in condenser coils—reducing efficiency by 20–30% if not properly maintained. Tell Projects sizes all commercial units using load calculations that account for Houston's climate; oversized systems waste energy, undersized ones fail in peak heat. We use high-efficiency coils with microchannel technology, reducing fouling and extending unit life by 3–4 years. On the roofing side, intense UV exposure and heavy summer storms damage traditional asphalt shingles within 12–15 years. We specify hurricane-rated membranes (GAF Timberline, Owens Corning) rated for 140+ mph winds and use reflective coatings that reduce roof temperature by 30°F, lowering cooling costs. Preventive HVAC maintenance (quarterly inspections, filter changes, coil cleaning) costs $89–$149/month and prevents emergency repairs averaging $2,500+ per incident.
What's the typical timeline and cost for a multifamily kitchen and bathroom renovation in Houston?
Timeline depends on unit count and scope. For a 28-unit complex, Tell Projects typically requires 10–14 weeks with 3 concurrent crews. Kitchen remodels (new appliances, quartz counters, cabinetry, backsplash) cost $16,000–$22,000 per unit; bathrooms (tile, vanity, fixtures, paint) cost $8,000–$14,000 per unit. A full 28-unit renovation ranges $672,000–$1,008,000 depending on finishes and site conditions. Labor represents 45–55% of costs; materials 40–45%; contingency 5%. We provide free 3D renderings and a detailed proposal before mobilization. Financing options include construction loans with payment-as-you-go draw schedules. ROI is typically realized within 12–24 months through higher occupancy rates and increased rents: our clients average $150–$250/month rent increases post-renovation, yielding $51,000–$84,000 annual revenue per 28-unit property.
Can Tell Projects complete a commercial kitchen installation and electrical upgrade in a retail space within 8 weeks?
Yes, with proper planning. A 5,800 sq ft retail space typically requires 4–8 weeks depending on site conditions and local permitting. Tell Projects uses fast-track scheduling: demolition and framing happen simultaneously with permit applications, electrical rough-in starts as soon as framing is complete, and plumbing/HVAC are phased to avoid coordination delays. For a restaurant kitchen, we order hood systems, walk-in units, and commercial appliances upfront (6–8 week lead times) so equipment arrives as buildout nears completion. Electrical upgrades (200A service upgrade, 40 new circuits, emergency lighting) take 10–14 days with a licensed electrician on-site. Our project management system flags long-lead items and buffers timelines to protect against supplier delays. In a recent Katy project, we completed a 5,800 sq ft buildout with full kitchen in 8 weeks, on budget and on time, enabling the tenant's grand opening as scheduled.
What multifamily properties in Houston has Tell Projects worked on, and what neighborhoods do you serve?
Tell Projects has completed 67 multifamily projects across Houston's 23-city metro, with concentrations in Midtown, Uptown, Heights, Montrose, Inner Loop, Katy, League City, Cypress, The Woodlands, and Pearland. Recent projects include a 28-unit retrofit in Midtown (kitchen/bath), a 40-unit complex in Katy (roofing and HVAC), a 35-unit property in League City (common area renovation), and a 22-unit building in Heights (electrical panel upgrade and LED retrofit). We serve properties ranging 12 units to 300+ units and manage both standard renovations and emergency repairs. Multifamily clients appreciate our understanding of occupancy coordination, maintenance scheduling, and resident communication protocols. We've established relationships with property management companies across the Houston metro and offer tiered service packages: emergency dispatch ($95 call-out fee), preventive maintenance contracts ($89–$149/month), and fixed-price renovation scopes. Call (832) 591-7991 to discuss your property's needs.
How does Tell Projects' full-service model save time and money compared to hiring separate electricians, plumbers, and roofers?
Fragmented subcontracting creates coordination delays, change orders, and disputes over responsibility. Tell Projects operates as a vertically integrated GC: all electrical, plumbing, HVAC, and roofing work is performed by in-house licensed crews, not farmed out to separate subs. This eliminates 40–60% of typical delays—no waiting for an electrician to finish before the plumber can start, no finger-pointing over water damage or code violations. On a 12-unit apartment renovation in Cypress, the full-service model compressed timeline from 30 days (traditional subcontracting estimate) to 18 days by running phases in parallel. Cost savings: $18,000 in labor overhead and schedule acceleration. Warranty is unified: one company, one insurance policy, one point of accountability. If a plumbing rough-in interferes with an electrical panel, our crews solve it on-site without delays or additional fees. Fixed pricing is easier to enforce when one team controls all trades, reducing surprises and change orders. Total project cost stability increases, and project completion is 20–35% faster than multi-contractor models.