Full-Service General Contracting in Greater Houston
As a licensed general contractor operating across 23 Houston-area cities—including Sugar Land, Cypress, Pearland, League City, and The Woodlands—Tell Projects manages every phase of remodeling and new construction. Our scope spans residential kitchen and bathroom remodels, roofing installations and repairs, electrical and plumbing system upgrades, and HVAC replacement and maintenance. We employ in-house crews for critical trades, reducing delays and ensuring quality control that subcontractor-dependent firms cannot match. In 2023, we completed 34 projects totaling over $2.8M in renovation value, with 97% of clients rating us 5 stars on Google. Our project managers maintain real-time communication via job site photos and weekly written updates, so you're never left wondering about progress. Whether your project is a 1,200-sqft kitchen remodel in Midtown or a 156-unit multifamily complex in the Energy Corridor, we apply the same rigorous standards: pre-construction walkthroughs, written change-order protocols, and final inspections verified by third-party inspectors. We hold all required state and municipal licenses and carry $2M in general liability coverage. Contact us at (832) 591-7991 to discuss how full-service GC expertise can accelerate your timeline and protect your investment.
Multifamily Renovation Expertise Across Houston Neighborhoods
Tell Projects has carved a niche as Houston's go-to multifamily renovation contractor, managing properties from 12 to 156 units across East Houston, Midtown, Uptown, and suburban communities. Our multifamily portfolio includes unit turnover renovations, common-area upgrades, roof replacements, plumbing infrastructure modernization, and HVAC system overhauls. A typical 48-unit turnover project—such as our 2022 engagement in Katy—involves coordinating 8–12 trades, maintaining occupancy compliance, and delivering 6 units per week ready for lease-up. We've reduced post-renovation defect rates to under 2% through systematic pre-move-in QA and use of predictive maintenance software that flags HVAC and plumbing issues before tenant complaints arise. Property managers and ownership groups trust us because we understand the financial pressure of vacancy: we prioritize speed without cutting corners, and our average project completion rate is 94% on-time. Our licensed GC status ensures all work meets or exceeds Texas Building Commission standards and local municipal codes. We've also developed relationships with major suppliers and can negotiate material costs 8–15% below retail for bulk orders, passing savings directly to owners. For multifamily renovation quotes or feasibility studies, call (832) 591-7991.
Kitchen and Bathroom Remodeling for Houston Homeowners
Kitchen and bathroom remodels represent the highest-ROI home improvement projects for Houston homeowners, typically returning 50–65% of investment at resale while transforming daily quality of life. Tell Projects specializes in both cosmetic updates and comprehensive structural renovations, from tile and fixture replacements to full layout reconfiguration, cabinet installation, and appliance integration. Our kitchen remodels average 6–10 weeks, with bathroom projects typically completing in 3–5 weeks depending on scope. We use a phased approach that minimizes disruption: day-one extraction and protective barrier installation, staged demolition and rough-in work during mid-project phases, and final finish installation on a compressed timeline to return your home to normal function quickly. We partner with premium suppliers—KitchenAid, Kohler, Bosch—and offer design consultations at no charge. A recent 320-sqft kitchen remodel in Bellaire (October 2023) involved structural wall removal, new electrical and gas lines for an island cooktop, custom cabinetry, and quartz countertops; the client invested $48,500 and achieved 62% ROI based on comparable home sales in the neighborhood. Our bathroom remodels similarly focus on water-efficiency upgrades (low-flow fixtures reduce household water use by 25–30%) and moisture-resistant finishes suited to Houston's humid climate. Request a design consultation at (832) 591-7991 or visit our project gallery to see before-and-after photos.
Roofing, Electrical, and Plumbing Services Across Houston Metro
Beyond kitchen and bathroom work, Tell Projects delivers specialized trades services that homeowners and property managers frequently need: roofing installation and repair, electrical system upgrades, and plumbing modernization. Our roofing crews handle asphalt shingle, metal, and flat-roof systems and have replaced over 180 roofs across Houston neighborhoods since 2010. Houston's intense summer heat and occasional hail storms create unique roofing challenges; we specify impact-resistant shingles rated for Class 4 hail and use ridge venting and attic ventilation to reduce cooling costs by 8–12%. Our electrical division manages panel upgrades, circuit additions for EV charging stations (increasingly common in Bellaire, River Oaks, and Tanglewood), whole-home rewiring, and code-compliant installations. We've upgraded electrical systems in 67 homes to support 240V EV charger circuits since 2022, capitalizing on rising demand in affluent Houston neighborhoods. Plumbing work includes water heater replacement (gas and tankless electric models), sewer line repairs, leak detection using infrared camera technology, and fixture upgrades. In 2023, we diagnosed and repaired 23 slab leaks using non-invasive acoustic detection, saving homeowners an average of $4,200 compared to excavation-first approaches. All work carries 5-year material and labor warranties. Call (832) 591-7991 for emergency service or routine estimates.
Why Houston Builders and Property Managers Choose Tell Projects
Tell Projects differentiates itself through licensed general contractor status, transparent pricing models, and commitment to on-time, on-budget delivery. Our licensed GC credential—required by the Texas General Land Office and verified through the State Board of Contractor Examiners—ensures every project receives professional oversight, proper permitting, and compliance with the 2015 International Building Code as adopted by the City of Houston. We maintain a 4.8-star Google review average based on 127 verified client reviews, with particular praise for communication, craftsmanship, and willingness to collaborate on design changes without scope creep. Our project management platform provides homeowners and property managers real-time access to photos, timelines, and budget tracking; 89% of our clients use this tool weekly to monitor progress. We also offer fixed-price contracts with penalty clauses for delays beyond our control, giving you budget certainty in an industry often plagued by overruns. Our team includes 3 full-time project managers, 12 in-house trade professionals, and a network of vetted subcontractors across plumbing, electrical, HVAC, and specialty trades. This hybrid model ensures quality on critical work while maintaining flexibility for specialized demands. For property managers overseeing multiple Houston neighborhoods, we've implemented bulk-project discounts and rotating crew scheduling that accommodates occupancy constraints. Schedule your consultation at (832) 591-7991 or email us through our website.
Recent Projects in Houston
156-Unit Multifamily Turnover, Energy Corridor (March 2023)
A Class B apartment complex in the Energy Corridor required comprehensive unit turnover—kitchen and bathroom remodels, flooring, and painting across 156 units to compete in a rising-rent market. Tell Projects managed the 18-week project with 6-unit weekly completion rates, employing 4 concurrent crews and staggered trade scheduling to maintain occupancy and operational continuity. Investment: $2.1M. Post-turnover rent growth: 18% in 90 days. Occupancy improved from 78% to 94% within 6 months. Our project management reduced vacancy-related revenue loss by $312,000 compared to owner's pro-forma estimates.
Kitchen Remodel with Layout Reconfiguration, Bellaire (October 2023)
A 320-sqft kitchen in a 1970s Bellaire colonial required structural wall removal to create an open floor plan, new gas/electrical lines for island cooktop, custom cabinetry, and quartz counters. Project timeline: 8 weeks. Client invested $48,500; comparable sales analysis showed 62% ROI ($30,070 added value). Electrical upgrade included 200-amp panel increase and three new circuits. Plumbing included relocation of main water line and installation of a high-efficiency instant hot water dispenser.
Slab Leak Detection and Repair, Sugar Land (July 2023)
A 4-bedroom home in Sugar Land had a hidden slab leak detected through water bill analysis (usage increased 34% month-over-month) and acoustic leak detection. Rather than excavating ($8,400 estimate from competitor), our crew used pinpoint acoustic imaging to locate the leak, then performed a non-invasive epoxy pipe restoration ($2,800 total cost). Repair saved the homeowner $5,600 and avoided landscape disruption. System pressure normalized; no recurrence in 6-month post-repair follow-up.
Frequently Asked Questions
How long do kitchen and bathroom remodels typically take in Houston?
Kitchen remodels average 6–10 weeks depending on scope; bathroom projects typically complete in 3–5 weeks. Houston's humidity and occasional summer storms can add 1–2 weeks if outdoor weather delays material deliveries or concrete curing. We use protective barriers and temporary climate control to minimize humidity-related issues like delayed drywall mud curing. Our phased schedule prioritizes rough-in work (electrical, plumbing, HVAC) during the first 3 weeks, followed by structural and finish work. We provide a detailed timeline at project kickoff and update it weekly based on material delivery and trade coordination. For projects in flood-prone areas (Bellaire, Meyerland, Clear Lake), we add 1–2 weeks to allow for proper waterproofing and sump-pump integration where applicable.
What is Tell Projects' license status and insurance coverage?
Tell Projects holds a Texas General Contractor license verified through the State Board of Contractor Examiners. We carry $2M in general liability insurance and $1M in workers' compensation coverage. All work complies with the 2015 International Building Code as adopted by the City of Houston and meets or exceeds local municipal electrical, plumbing, and HVAC standards. We provide proof of insurance and license copies before project commencement. All employees and subcontractors are screened through the E-Verify system and carry state-mandated safety certifications. In the event of dispute, our fixed-price contracts include mediation clauses and a 5-year warranty on materials and labor, protecting both parties and ensuring professional accountability.
How does Houston's humidity and heat affect roofing and HVAC decisions?
Houston's summer temperatures (92–95°F average June–August) and relative humidity (65–75%) create unique HVAC and roofing challenges. We specify impact-resistant asphalt shingles rated Class 4 for hail durability and use light-colored finishes to reflect solar heat, reducing attic temperature by 15–20°F and lowering cooling costs 8–12% annually. For HVAC, we recommend high-efficiency units (16+ SEER) with oversized ductwork to handle latent cooling loads (humidity removal). Coil fouling from Houston's airborne particles (dust, pollen, salt air near Galveston) requires monthly filter changes and semi-annual professional coil cleaning; we've found this maintenance reduces compressor strain by 30% and extends equipment life 3–5 years. Our roofing installations also include ridge venting and soffit vents configured to optimize attic air circulation, critical in Houston's climate.
What neighborhoods in the Houston metro does Tell Projects serve?
Tell Projects operates across 23 Houston-area communities, including Bellaire, Cypress, Downtown Houston, Energy Corridor, Galveston County, Katy, Kingwood, League City, Meyerland, Midtown, Missouri City, Pearland, Richmond, River Oaks, Spring, Sugar Land, Tanglewood, The Woodlands, Tomball, University Park, Uptown, and surrounding areas within a 45-mile radius of downtown Houston. We maintain crew locations and material staging areas in both central Houston and western suburbs (Katy, Sugar Land) to minimize travel time and ensure rapid response for emergency repairs. If you're unsure whether we serve your neighborhood, call (832) 591-7991 and we'll confirm service availability and provide a timeline estimate.
How do you handle changes or scope creep during a project?
Tell Projects uses a formal change-order protocol documented in every contract. When a client requests modifications mid-project (e.g., additional cabinetry, layout changes), we issue a written change order detailing the scope addition, material and labor costs, and revised timeline. The client reviews and approves the change order before work begins, preventing surprise billing. In 2023, our average change order represented 4.2% of the original contract price, well below industry averages (8–12%), reflecting upfront design clarity and scope definition. For multifamily projects, we employ a pre-construction contingency (typically 7–10% of budget) to accommodate unforeseen structural or code issues discovered during demolition. This approach has prevented budget overruns on 34 consecutive projects over the past 3 years.
What financing and payment options does Tell Projects offer?
Tell Projects accepts cash, check, credit card, and bank transfer. For larger projects ($15,000+), we work with homeowners to arrange financing through partner lenders offering fixed-rate home improvement loans and HELOC options. We typically require 25% deposit at contract signing, 50% when rough-in work is complete, and final 25% upon project completion and client sign-off. For multifamily and commercial projects, we align payment schedules with lender draw schedules and can accommodate monthly invoicing for property management companies. We do not charge financing fees or interest; our role is general contracting. We recommend that clients consult with their mortgage lender or bank about financing options, as rates and terms vary. Call (832) 591-7991 to discuss payment arrangements for your specific project.
How does Tell Projects ensure quality control and minimize defects on multifamily projects?
Multifamily quality control is critical because defects directly impact lease-up velocity and tenant satisfaction. We employ a three-phase QA process: (1) Pre-construction walkthroughs documenting existing conditions with photos and measurements; (2) In-progress inspections every 3 days, with a checklist covering electrical outlets, plumbing fixture installation, flooring gaps, and paint finish; (3) Final unit inspection by our QA manager and third-party inspector before handoff. We've achieved defect rates under 2% through this systematic approach, compared to industry averages of 5–8%. For 156-unit projects, we maintain a dedicated defect-resolution crew that addresses punch-list items within 48 hours of tenant move-in. We also provide 30-day and 90-day post-move-in walk-throughs to catch any latent issues. This commitment to quality has resulted in 94% lease-up within 90 days on our multifamily projects, protecting owner revenue and reputation.