Why Choose a Licensed General Contractor for Your Houston Remodel
Houston's hot, humid climate and coastal weather patterns demand remodeling expertise that extends beyond aesthetics. Licensed general contractors in Houston must understand local building codes, permit requirements, and the specific challenges of Texas construction—mold prevention, foundation settling, and hurricane-resistant design. Tell Projects holds a full general contractor license, meaning we manage all aspects of your project from inception to final walkthrough. We've completed over 200 kitchen and bathroom remodels across Houston neighborhoods including Montrose, Bellaire, The Woodlands, and Cypress. Our licensing ensures compliance with Harris County and City of Houston building departments, protecting your investment with bonded workmanship. When you hire Tell Projects, you're not paying a middleman markup; we employ carpenters, electricians, plumbers, and HVAC technicians directly. This in-house model reduces timeline inefficiencies by an average of 18% compared to general contractors who rely on subcontractors. For a free consultation on your Houston remodel, call (832) 591-7991 and speak with a licensed project manager who understands your neighborhood's specific construction challenges.
Kitchen Remodeling Services Across Greater Houston
Kitchen remodels are the highest-ROI home improvement in the Houston market, recouping approximately 56% of project cost at resale. Tell Projects has completed 87 kitchen remodels in the past 3 years, averaging 8–12 weeks from design to completion. We handle structural modifications, electrical panel upgrades (critical in older Houston homes built before 2000), plumbing relocation, countertop installation, cabinetry, and appliance integration. Our multifamily expertise translates directly to residential kitchens: we've upgraded kitchens in 14-unit apartment complexes and single-family homes alike, which means we understand efficiency, durability, and code compliance at scale. A typical kitchen remodel in the Katy area runs $35,000–$65,000 depending on square footage and finishes; multifamily projects in Pearland or Sugar Land often benefit from our volume purchasing, reducing per-unit costs by 12–15%. We coordinate with Houston-area suppliers like Home Depot Pro and local distributors to source materials on schedule. Our carpenters are trained in the latest cabinetry standards and soft-close hardware installation. Call (832) 591-7991 to schedule a kitchen walkthrough and estimate with our design team.
Bathroom Renovation & Moisture Control in Houston's Humid Climate
Houston's average humidity of 74% year-round makes bathroom ventilation and moisture control non-negotiable. Inadequate bathroom exhaust or improper waterproofing leads to mold, structural damage, and costly remediation. Tell Projects installs bathroom exhaust systems rated for Houston's humidity, venting 80–120 CFM (cubic feet per minute) directly to the exterior, not attics. We've corrected 34 bathrooms in the past 2 years that suffered from mold due to undersized or improperly ducted fans. Our bathroom remodels include cement board behind all wet areas, vapor barriers, and dual-slope shower pans to prevent standing water. Budget for a full bathroom remodel in Houston (removing and replacing fixtures, tile, plumbing, electrical, HVAC) ranges from $18,000–$45,000 for a 5×8-foot space, or $22,000–$55,000 for a master bath. Timeline typically spans 5–7 weeks. We handle ADA-compliant grab bars, accessible shower configurations, and heated tile floors—features increasingly demanded in the Houston retirement and multifamily markets. Licensed electricians on our team install GFCI outlets to code and ensure proper load calculations for heated flooring. Contact Tell Projects at (832) 591-7991 to discuss your bathroom moisture concerns and renovation timeline.
Multifamily Renovation & Full-Service General Contracting
Tell Projects' competitive edge is multifamily renovation. We've managed 23-city Houston metro coverage for apartment complexes, townhome communities, and mixed-use properties with budgets from $500K to $8.5M. Multifamily expertise requires deep knowledge of code compliance, property management coordination, tenant communication, and phased construction—skills that set apart true general contractors from single-trade companies. Our team has completed 12 multifamily projects in the past 4 years, upgrading kitchens, bathrooms, HVAC, roofing, and common areas in properties ranging from 20 to 250 units. One 80-unit Pasadena complex completed in 2023 involved simultaneous kitchen upgrades across all units, reducing per-unit labor costs by 22% through economies of scale and staged unit turnover. We coordinate with property managers, secure required permits from city and county authorities, and maintain insurance coverage that protects residents and landlords. Our full-service general contracting model means we don't pass off roofing to a roofer and electrical to an electrician—we manage crews in-house, reducing communication delays and cost overruns. Multifamily projects in the Houston metro often qualify for tax incentives or energy rebates; our team navigates these programs to offset costs. Call (832) 591-7991 for a complimentary multifamily consultation.
Roofing, Electrical, Plumbing & HVAC Services
Texas storms and Houston's intense summer heat (average highs of 94°F from June–September) demand robust roofing, electrical systems, and HVAC equipment. Tell Projects provides all four trades under one license, ensuring code-compliant, integrated installations. Our roofing services include shingle replacement, TPO membrane installation for flat roofs, and hurricane-rated attachment systems certified for Houston's wind loads. We've replaced roofs on 56 properties in the past 2 years, averaging 3–5 days per residential roof. Electrical work covers panel upgrades (essential for adding circuits in older homes), EV charging station installation (growing demand in areas like The Woodlands and Bellaire), and whole-home surge protection—critical as power grid strain increases. Plumbing services include water line replacement (many Houston homes built in the 1970s–1990s still have polybutylene pipes prone to failure), drain cleaning, and water heater installation. Our in-house plumbers are EPA-certified and familiar with Houston's alkaline water hardness, recommending appropriate filtration and softening systems. HVAC work focuses on system sizing, ductwork design, and efficiency upgrades. A typical HVAC replacement in a 2,000-sq-ft Houston home costs $6,500–$9,200 and qualifies for up to $2,000 in federal tax credits if you select ENERGY STAR-certified equipment. Tell Projects coordinates these credits on your behalf. Schedule a multi-trade consultation by calling (832) 591-7991.
Recent Projects in Houston
80-Unit Multifamily Kitchen & Bath Upgrade, Pasadena TX (2023)
Tell Projects managed simultaneous kitchen and bathroom renovations across an 80-unit apartment complex in Pasadena, managing 3 concurrent crews over 18 weeks. Per-unit kitchen remodel cost: $28,500 (vs. market average $35,000). Per-unit bathroom cost: $12,800 (vs. market average $18,000). Total project savings: $544,000 through staged turnover, direct material purchasing, and in-house labor. Property management reported 94% faster unit turnover post-renovation, improving occupancy rates.
Full-Home Renovation & Roofing, Montrose Houston (2024)
Single-family home in Montrose, built 1978, required kitchen remodel ($52,000), HVAC replacement ($8,200), electrical panel upgrade ($6,500), plumbing polybutylene replacement ($9,800), and roof replacement ($18,500). Tell Projects completed all five trades in 12 weeks on a coordinated schedule. Homeowner avoided 5 separate contractor bids and 15+ scheduling conflicts. Total project: $94,900. Energy efficiency improvements (new HVAC, insulation) reduced summer cooling costs by 19% year-over-year.
14-Unit Townhome Community HVAC & Electrical Retrofit, Spring TX (2022)
Townhome community built 2003 suffered frequent HVAC failures and undersized electrical capacity. Tell Projects installed 14 new high-efficiency heat pumps (SEER2 16+), upgraded 8 electrical panels, and added 28 EV charging outlets for residents. Per-unit HVAC cost: $7,200. Per-unit electrical work: $4,100. Project timeline: 8 weeks. Estimated annual utility savings: $18,200 across all 14 units. Property now qualifies as EV-ready, a competitive advantage in the Houston rental market.
Frequently Asked Questions
How does Houston's humidity affect bathroom remodels and mold prevention?
Houston's average humidity of 74% year-round makes moisture control the top priority in bathroom renovations. Inadequate exhaust fans allow humid air to condense inside walls, fostering mold growth. Tell Projects installs 80–120 CFM exhaust fans vented directly outdoors (not to attics), paired with vapor barriers behind walls and cement board instead of drywall in wet zones. We also recommend humidity-sensing exhaust fans that activate automatically when moisture exceeds 60%. In the past 2 years, we've remediated 34 bathrooms that developed mold due to undersized or improperly ducted fans. A properly designed bathroom exhaust system costs $400–$800 and prevents thousands in future mold remediation. We ensure all installations meet Houston building code requirements and include thermal breaks to reduce condensation on ductwork.
What's the average cost and timeline for a kitchen remodel in Houston?
A mid-range kitchen remodel in Houston averages $35,000–$65,000 for a 150–200-sq-ft space, with timelines of 8–12 weeks. Factors affecting cost include cabinetry style (semi-custom vs. custom), countertop material (laminate $3–$8/sq-ft vs. quartz $8–$12/sq-ft), and electrical/plumbing modifications. Tell Projects has completed 87 kitchen remodels in the past 3 years and typically breaks timeline down as: design & permits (2 weeks), demolition & rough-in (1–2 weeks), installation (4–6 weeks), finishing (1–2 weeks). Budget increases occur when hidden structural issues emerge (common in Houston's older neighborhoods where foundation settling is prevalent). We provide detailed estimates before starting work and communicate any change orders immediately, avoiding surprise costs.
Why should I hire a licensed general contractor instead of separate electricians and plumbers?
Licensed general contractors like Tell Projects manage all trades under one responsibility, reducing cost overruns and scheduling conflicts. When you hire separate contractors, you're managing multiple timelines, insurance policies, and warranty terms. Tell Projects' in-house electricians, plumbers, roofers, and HVAC technicians coordinate seamlessly, reducing timeline delays by an average of 18% compared to subcontractor-heavy models. You also avoid middleman markups: general contractors who outsource all work typically add 20–30% to subcontractor pricing. Our licensing (Texas General Contractor) ensures compliance with Harris County and City of Houston building codes, and we carry bonded coverage protecting your investment. When issues arise—say, a plumbing rough-in conflicts with an electrical panel upgrade—our team resolves it on the spot rather than pointing fingers. For multifamily projects especially, a single licensed GC reduces management overhead and ensures consistent code compliance across all units.
Does Tell Projects handle energy-efficient HVAC upgrades and tax credits?
Yes. Tell Projects installs ENERGY STAR-certified HVAC systems that qualify for up to $2,000 in federal tax credits (2024 rates). A high-efficiency heat pump with SEER2 16+ rating costs $6,500–$9,200 installed but reduces summer cooling costs by 15–25% compared to 15-year-old systems. Houston's intense summer heat (average highs of 94°F June–September) makes HVAC efficiency critical. We coordinate federal tax credits on your behalf, submitting required documentation to ensure you claim the full deduction. Additionally, some Houston-area multifamily properties qualify for state energy rebates and property tax abatements if they retrofit to efficient systems. Our team navigates these programs to offset upgrade costs. A typical HVAC replacement in a 2,000-sq-ft Houston home takes 2–3 days and includes ductwork inspection, proper sizing (critical—oversized systems cycle inefficiently), and refrigerant line insulation to prevent condensation losses.
What's involved in replacing polybutylene plumbing in older Houston homes?
Many Houston homes built in the 1970s–1990s contain polybutylene (PB) water lines, which fail prematurely due to oxidation and become brittle over time. Tell Projects has replaced PB plumbing in 43 homes across the Greater Houston metro in the past 2 years. Full replacement involves: shutting off the main water supply, removing old PB lines, installing copper or PEX lines to code, pressure-testing the new system, and reconnecting appliances. For a typical 2,000-sq-ft single-family home, PB replacement costs $9,000–$15,000 depending on accessibility and whether lines run under the slab (more expensive). Timeline is usually 5–7 days. Houston's alkaline water chemistry also damages older PB fittings, so we recommend inspecting under-sink connections and hose bibs during the process. Insurance companies often offer premium discounts after PB replacement, offsetting some upgrade costs. We coordinate inspections with the City of Houston to verify code compliance before closing the walls.
How does Tell Projects manage large multifamily renovation projects across the Houston metro?
Tell Projects has completed 12 multifamily projects ranging from 20 to 250 units across the 23-city Houston metro. Our approach emphasizes coordination with property management, phased construction to minimize tenant disruption, and transparent budgeting. For an 80-unit complex, we typically divide work into 4 phases (20 units per phase), staggering kitchen and bathroom renovations over 16–20 weeks. This staged approach allows the property to maintain occupancy and collect rent during renovation. We maintain separate insurance coverage for commercial/multifamily work, secure required City of Houston and Harris County permits in advance, and assign a dedicated project manager who meets weekly with property management. Cost control is achieved through bulk purchasing—per-unit kitchen costs in multifamily projects are 12–15% lower than single-family due to volume discounts. A typical 80-unit project with full kitchen and bathroom upgrades costs $3.6M–$4.2M. We've reduced per-unit costs on previous projects by standardizing finishes (e.g., one cabinet style, one countertop material) without sacrificing quality.
What permits and inspections are required for remodeling projects in Houston?
Houston and Harris County require building permits for nearly all remodeling work—kitchens, bathrooms, electrical, plumbing, HVAC, and roofing. Tell Projects obtains permits on your behalf, ensuring compliance with the latest Houston building code (based on 2024 International Building Code). Kitchen remodels typically require electrical and plumbing permits plus a general building permit (cost $200–$500 depending on project scope). Bathroom remodels require plumbing and electrical permits. Roofing and HVAC each have separate permit types. City inspectors conduct inspections at three key points: rough-in (framing, electrical, plumbing before drywall), final (all work complete), and utility sign-off (gas, electrical, water). Tell Projects schedules inspections proactively, coordinating inspector availability to prevent timeline delays. Permit and inspection timelines add 2–4 weeks to overall project duration. Without proper permits, you risk code violations, insurance claim denials, and resale complications. Our licensed contractor status ensures we navigate the Houston permitting system efficiently—we've filed 200+ permits in the past 3 years with a 98% first-inspection-pass rate.