Remodeling Services Across Houston & the Greater Metro

We build Houston-specific scheduling into every project. Neighborhoods like The Woodlands, Sugar Land, and Pearland often have strict construction hour restrictions (typically 7 AM–6 PM, no Sundays), which we respect and plan around. Our multifamily experience means we're accustomed to coordinating work across occupied units—we notify tenants 48 hours in advance, schedule trades to minimize disruption, and maintain common-area access. For single-family work, we use a detailed project timeline with milestone dates: permitting (5–10 business days for Houston proper), material procurement (1–3 weeks depending on custom items), installation phases (3–12 weeks based on scope), and final inspection. We've completed 150+ projects on schedule, averaging 94% on-time delivery. Your dedicated project manager provides weekly updates and communicates any delays immediately.

Houston kitchen remodels typically require permits for plumbing (if moving lines or adding fixtures), electrical (if upgrading circuits or adding outlets), and mechanical (if relocating HVAC vents). Permit timelines vary: Houston Building Permits department processes plumbing permits in 5–7 business days, electrical in 3–5 days, and mechanical in 3–5 days. If your project requires structural changes (removing walls, reinforcing beams), an additional 7–10 days applies for structural review. Total permitting window is typically 2–3 weeks. We handle all applications and shepherd inspections; you don't visit the permits office. Inspection scheduling (rough-ins, final) adds 1–2 weeks mid-project and 3–5 business days at end. This is why we quote kitchen remodels at 6–12 weeks total—permits represent 15–25% of timeline. Surrounding cities (Katy, Sugar Land, Pearland, The Woodlands) may have slightly faster processing (2–3 days faster) due to smaller permit volumes.

Houston's average humidity of 65–75% and summer temperatures exceeding 95°F demand moisture-resistant, mold-resistant materials. We recommend: (1) Porcelain tile instead of ceramic—porcelain absorbs <0.5% water vs. ceramic's 3–6%, crucial for Houston's constant moisture; (2) Quartz or granite countertops with epoxy sealing, which resist humidity better than laminate; (3) Moisture-resistant drywall (green board or cement board) behind tile, not standard drywall which can mold in Houston's climate; (4) Exhaust fans rated for 100+ CFM (cubic feet per minute), vented outside the home, not into attics where humidity traps; (5) Semi-gloss or satin paint finishes that resist mildew, not flat finishes. We source all materials locally—our suppliers understand Houston conditions and stock inventory suited to the climate. A bathroom remodel built with these specifications will resist mold for 15–20+ years; corners cut on material selection can lead to mold issues within 3–5 years. This is why our 9–14 year old projects in Houston still look pristine.

Multifamily roof replacement costs depend on building size, current roofing material, deck condition, and local labor rates. Houston metro averages: 20-unit building with 15,000 sqft roof (asphalt shingle, standard deck) runs $45,000–$60,000 ($3–$4 per sqft), or $2,250–$3,000 per unit. For 40-unit building with 28,000 sqft, expect $84,000–$112,000 ($3–$4 per sqft). Metal roofing (higher durability, 40–50 year lifespan vs. 20–25 years for asphalt) costs 30–50% more but qualifies for insurance discounts (10–15% in Houston, where wind loss is a major claims driver). We recently completed a 32-unit Pearland property (18,500 sqft) at $3.40/sqft = $63,000 total for architectural shingle with ice-and-water shield and 140-mph wind-rated installation. Labor in Houston runs $1.20–$1.80 per sqft due to strong demand; materials are $1.80–$2.40 per sqft. For a 20-unit building, budget $45,000–$65,000 all-in; get a detailed bid that breaks labor and materials.

Yes—it's one of our core strengths. Kitchen remodels often require HVAC adjustments (relocating or adding vents for range hoods, updating ductwork), electrical work (new circuits for induction cooktops, dishwashers, under-cabinet lighting, smart appliances), and sometimes plumbing changes. Coordinating these trades during kitchen renovation saves money and time: you pull permits once, contractors schedule sequentially (rough-ins before drywall, finish work after), and you avoid costly back-and-forth. A typical integrated kitchen remodel flows: demolition week 1, rough-ins (plumbing, electrical, HVAC, ductwork) week 2, drywall/framing week 3, cabinet/countertop installation week 4, fixture and finish installation weeks 5–6. Coordinating with a single GC (Tell Projects) eliminates the confusion of scheduling three separate vendors, waiting for one trade to finish before the next starts, and managing conflicting timelines. Our recent Katy kitchen project integrated a new dedicated electrical circuit (200 amps), HVAC vent relocation, and full plumbing reconfiguration in a 9-week window—a timeline unachievable if you hired separate contractors. Call (832) 591-7991 to discuss how we integrate your kitchen remodel trades.

Tell Projects operates as a Licensed General Contractor (License: Licensed General Contractor), meeting all Texas Department of Licensing & Regulation (TDLR) requirements for general contracting in residential and commercial work. Our license verifies that we've passed TDLR exams covering building codes, business practices, and contract law; we maintain continuous liability insurance ($2 million general liability, $1 million workers' compensation) and workers' comp coverage for all employees. You can verify our license status directly via the TDLR website (search our license number) or ask us for documentation during consultation. We also carry builder's risk insurance on active projects, protecting your property during construction. Many Houston homeowners and property managers require proof of licensing before hiring—we welcome this scrutiny because it protects both parties. When you call (832) 591-7991, we provide insurance certificates and license documentation immediately. Never hire a contractor offering 'cash discounts' for skipping permits or insurance—it's a red flag for unlicensed work, poor quality, and zero recourse if something goes wrong.

Our free quote process is thorough and obligation-free. We schedule a 45–60 minute on-site consultation where we: (1) photograph and measure your space; (2) discuss your goals, timeline, and budget; (3) identify code requirements, permit needs, and structural considerations specific to your home's age, location, and existing systems; (4) recommend material options suited to Houston's climate; (5) provide a detailed written estimate breaking down labor, materials, permits, and contingency (typically 10–15% for surprises). The written estimate includes a project timeline, scope of work, payment schedule (typically 30% deposit, 30% mid-project, 40% upon completion), and cleanup/warranty terms. We also include references from 3–5 recent clients in your zip code if requested. This quote provides everything you need to compare Tell Projects against other bids or make a decision independently. No pressure, no upsell. Call (832) 591-7991 or visit our website to request a quote—we'll contact you within 24 hours to schedule.